Sur-Fit Natura 2-PC Pre-Cut Durahesive Skin Barrier W/Tape Collar 45mm FLG, 10CT
0.0
(0)
How to get it
Details
Sur-Fit Natura 2-PC Pre-Cut Durahesive Skin Barrier W/Tape Collar 45mm FLG, 10CT
10.00 Ct, 0.8 lbs. Item # 547129
The Sur-Fit Natura two-piece ostomy system is ConvaTec's most extensive two-piece product line. The Sur-Fit Natura flange system signals a secure, accurate closure with a series of audible "clicks." A simple snap-off, snap-on design allows users to change the pouch quickly to match activities without removing the skin barrier from the skin. Durahesive skin barriers are designed for people whose stoma output is mostly liquid. Unlike other skin barriers that can break down around liquid output, Durahesive skin barriers swell up to protect the stoma. This special effect, called turtlenecking, helps create a more secure seal without harming the skin. Durahesive skin barriers are also easy to fit, apply, and remove. They will adhere securely to the skin while showering, bathing and swimming. FSA eligible
Lifestyles: Colostomy, ileostomy, urostomy, daywear, nightwear, extended travel, maximum protection, hospital, sensitivity, bathing, extended wear, retracted stoma, travel, active, flush/retracted stomas, sensitive skin, swimming
Tape collar
White
Durahesive skin barrier provides added protection from liquid output. Durahesive skin barriers will turtleneck or gently swell up and hug the stoma, better protecting the skin around your stoma
Coupling ring provides audible click confirming secure connection to pouch
Built in convex-it provides extra protection for recessed, retracted or flush stomas
White fabric collar increase flexibility
Pre-cut stoma opening
Durahesive technology has a unique combination of naturally derived hydrocolloids to provides long-lasting. Skin friendly protection but still remain kind on removal
Lifestyles: Colostomy, ileostomy, urostomy, daywear, nightwear, extended travel, maximum protection, hospital, sensitivity, bathing, extended wear, retracted stoma, travel, active, flush/retracted stomas, sensitive skin, swimming
Tape collar
White
Durahesive skin barrier provides added protection from liquid output. Durahesive skin barriers will turtleneck or gently swell up and hug the stoma, better protecting the skin around your stoma
Coupling ring provides audible click confirming secure connection to pouch
Built in convex-it provides extra protection for recessed, retracted or flush stomas
White fabric collar increase flexibility
Pre-cut stoma opening
Durahesive technology has a unique combination of naturally derived hydrocolloids to provides long-lasting. Skin friendly protection but still remain kind on removal
| Benefit | Select a value |
|---|---|
| Color | Select a value |
| Concern | Medical grade |
| Features | Flexible |
| Form | Select a value |
| Key ingredient | Select a value |
| Material | Other |
| Product type | Skin barrier rings |
| Quantity | Select a value |
| Symptopm | Select a value |
Ingredients
See the full list of product ingredients on the product label.
Directions
See directions below. Preparation of skin barrier/wafer: Measure your stoma using the measuring guide provided. Select a skin barrier with a flange (white ring) at least 0.5 in. larger than your stoma size. For flush or retracted stomas, convex skin barriers are recommended
Trace the exact same stoma size onto the center white release paper on the back of the skin barrier
Cut along the tracing with a curved scissor. If using a pre-cut wafer, no cutting necessary. ConvaTec skin barriers are available in Stomahesive and Durahesive, solid and flexible with or without convexity
A caulking material such as Stomahesive paste or an Eakin cohesive seal, can be applied to the back of the skin barrier to further fill gaps between the wafer and the stoma
Allow the paste to set for one minute prior to application to the skin (do not spread the paste)
Application of skin barrier/wafer:
Center the skin barrier over the stoma; press the skin barrier against the skin if using a tape bordered skin barrier, remove the remaining backing paper one side at a time
During application, maintain gentle pressure on the skin barrier for 30 seconds to improve adhesion
Removal of skin barrier/wafer: Gently pull the skin barrier down, away from the skin, while supporting the adjacent skin with your other hand.
To assist with the barrier removal, an AllKare adhesive remover wipe may be used to remove any adhesive buildup
Trace the exact same stoma size onto the center white release paper on the back of the skin barrier
Cut along the tracing with a curved scissor. If using a pre-cut wafer, no cutting necessary. ConvaTec skin barriers are available in Stomahesive and Durahesive, solid and flexible with or without convexity
A caulking material such as Stomahesive paste or an Eakin cohesive seal, can be applied to the back of the skin barrier to further fill gaps between the wafer and the stoma
Allow the paste to set for one minute prior to application to the skin (do not spread the paste)
Application of skin barrier/wafer:
Center the skin barrier over the stoma; press the skin barrier against the skin if using a tape bordered skin barrier, remove the remaining backing paper one side at a time
During application, maintain gentle pressure on the skin barrier for 30 seconds to improve adhesion
Removal of skin barrier/wafer: Gently pull the skin barrier down, away from the skin, while supporting the adjacent skin with your other hand.
To assist with the barrier removal, an AllKare adhesive remover wipe may be used to remove any adhesive buildup
Warnings
Please follow as instructed on the product label.
From Sur-Fit Natura
*Customer reviews and ratings solely reflect the views and opinions of the individual contributors and are not created or endorsed by CVS Pharmacy. Please review the product labeling and consult with your doctor with any health or medical questions.
Sur-Fit Natura 2-PC Pre-Cut Durahesive Skin Barrier W/Tape Collar 45mm FLG, 10CT
0.0
(0)