Shoe Gear Shoe Goo, Shoe Repair, Clear
5.0
(6)
How to get it
Details
Shoe Gear Shoe Goo, Shoe Repair, Clear
1.00 OZ, 0.1 lbs. Item # 348063
Shoe Gear Shoe Goo is a superior adhesive and sealant that easily and permanently repairs all types of footwear. It adheres to all kinds of materials, so use Shoe Goo to mend rubber soles, tears in sports and camera bags, or leather shoe tops. It dries to a waterpr Superior adhesive and sealant for repairing footwear
Works on various materials, including rubber soles, sports bags, and leather shoe tops
Provides a permanent and strong bond
Dries to a waterproof finish
Works on various materials, including rubber soles, sports bags, and leather shoe tops
Provides a permanent and strong bond
Dries to a waterproof finish
| Color | Clear |
|---|---|
| Product type | Sanitizers |
Directions
See directions below. 1. Please read all directions before using. Shoe Goo should be used in a well-ventlated area.
2. Surface should be clean, dry and free of dirt. For best results, roughen surface before use. Best when used between 70 degrees F and 85 degrees F.
3. Puncture seal at the top of the tube using the pointer cap.
4. Always test a small area to ensure proper application technique and dry time.
5. Apply Shoe Goo directly to the area to be repaired.
6. Allow the repair to dry for 24 hours. Various materials will require different drying times.
7. Keep threads at the neck of the tube free of Shoe Goo residue. To ensure easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap.
8. Clean uncured adhesive with small amounts of acetone or naphtha
the adhesive will ball up and brush off. Cured material may be removed by cutting or scraping.
9. Store unused Shoe Goo at room temperature with cap tightened.
10. For further information, call (800) 767-4667. NOTE: Shoe Goo may damage finished surfaces. Avoid such contact until Shoe Goo is completely dry.
2. Surface should be clean, dry and free of dirt. For best results, roughen surface before use. Best when used between 70 degrees F and 85 degrees F.
3. Puncture seal at the top of the tube using the pointer cap.
4. Always test a small area to ensure proper application technique and dry time.
5. Apply Shoe Goo directly to the area to be repaired.
6. Allow the repair to dry for 24 hours. Various materials will require different drying times.
7. Keep threads at the neck of the tube free of Shoe Goo residue. To ensure easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap.
8. Clean uncured adhesive with small amounts of acetone or naphtha
the adhesive will ball up and brush off. Cured material may be removed by cutting or scraping.
9. Store unused Shoe Goo at room temperature with cap tightened.
10. For further information, call (800) 767-4667. NOTE: Shoe Goo may damage finished surfaces. Avoid such contact until Shoe Goo is completely dry.
From Shoe Gear
Additional resources
*Customer reviews and ratings solely reflect the views and opinions of the individual contributors and are not created or endorsed by CVS Pharmacy. Please review the product labeling and consult with your doctor with any health or medical questions.
Shoe Gear Shoe Goo, Shoe Repair, Clear
5.0
(6)