ResMed Swift FX (mask cushion only)

See the full list of product ingredients on the product label. Please see the full list of product ingredients on the product label.

See directions below. Daily/After each use:
To optimize the mask seal, facial oils should be removed from the cushion after use
Handwash the separated mask components (excluding headgear)
If the vent requires cleaning use a soft bristle brush
Weekly:
Handwash the headgear. It may be washed without being disassembled

ResMed Swift™ FX (mask cushion only). Using your mask: When using your mask with ResMed CPAP or bilevel devices that have mask setting options, refer to the Technical Specifications section in this user guide for mask selection options.  The holes must be kept clear.
 The mask should not be used unless the CPAP system is turned on and operating properly.
 Follow all precautions when using supplemental oxygen.
 Oxygen flow must be turned off when the CPAP or bilevel device is not operating so that unused oxygen does not accumulate within the CPAP or bilevel device enclosure and create a risk of fire.
 At a fixed rate of supplemental oxygen flow, the inhaled oxygen concentration varies, depending on the pressure settings, patient breathing pattern, mask, point of application and leak rate.
 The technical specifications of the mask are provided for your clinician to check that they are compatible with the CPAP or bilevel device.
If used outside specification or if used with incompatible devices, the seal and comfort of the mask may not be effective, optimum therapy may not be achieved, and leak may affect the CPAP or bilevel device function.
 Discontinue using this mask if you have ANY adverse reaction to the use of the mask, and consult your physician or sleep therapist.
 Using a mask may cause tooth, gum or jaw soreness or aggravate an existing dental condition. If symptoms occur, consult your physician or dentist.
 As with all masks, some rebreathing may occur at low CPAP pressures.
 Refer to your CPAP or Bilevel device manual for details on settings and operational information.
 Remove all packaging before using the mask.
 If any visible deterioration of a system component is apparent (cracking, crazing, tears or cushion damage), the component should be discarded and replaced.
 Avoid connecting flexible PVC products (eg, PVC tubing) directly to any part of the mask. Flexible PVC contains elements that can be detrimental to the materials of the mask and may cause the components to crack or break.