ResMed Quattro Air Frame System (without headgear)

See the full list of product ingredients on the product label. Please see the full list of product ingredients on the product label.

ResMed Quattro™ Air frame system (without headgear) Replacing your equipment The Centers for Medicare and Medicaid Services (CMS) coverage guidelines allow for regular replacement of masks and accessory parts, like air filters or tubing. Replacing your mask and accessories as appropriate helps ensure you are receiving the best, most comfortable therapy possible.

ResMed Quattro™ Air frame system (without headgear) -Small Intended Use The Quattro Air is a noninvasive accessory used for channeling airflow(with or without supplemental oxygen) to a patient from a positive airway pressure (PAP) device such as a continuous positive airway pressure (CPAP) or bilevel system. Using your mask When using your mask with ResMed CPAP or bilevel devices that have mask setting options, refer to the Technical specifications section in this user guide for mask selection options. To be used by patients (weighing 66 lb (30 kg)) for whom positive airway pressure therapy has been prescribed
Intended for single-patient reuse in the home environment and multipatient reuse in the hospital/institutional environment
The mask must be used under qualified supervision for users who are unable to remove the mask by themselves. The mask may not be suitable for those predisposed to aspiration
The elbow and valve assembly have specific safety functions. The mask should not be worn if the valve is damaged as it will not be able to perform its safety function. The elbow should be replaced if the valve is damaged, distorted or torn
The vent holes must be kept clear
The mask should only be used with CPAP or bilevel devices recommended by a physician or respiratory therapist
The mask should not be used unless the device is turned on. Once the mask is fitted, ensure the device is blowing air
Follow all precautions when using supplemental oxygen
Oxygen flow must be turned off when the CPAP or bilevel device is not operating, so that unused oxygen does not accumulate within the device enclosure and create a risk of fire
Oxygen supports combustion. Oxygen must not be used while smoking or in the presence of an open flame. Only use oxygen in well ventilated rooms
At a fixed rate of supplemental oxygen flow, the inhaled oxygen concentration varies, depending on the pressure settings, patient breathing pattern, mask, point of application and leak rate. This warning applies to most types of CPAP or bilevel devices