ResMed Quattro Air for Her (headgear only)

See the full list of product ingredients on the product label. Please see the full list of product ingredients on the product label.

ResMed Quattro™ Air for Her (headgear only) - Standard Replacing your equipment The Centers for Medicare and Medicaid Services (CMS) coverage guidelines allow for regular replacement of masks and accessory parts, like air filters or tubing. Replacing your mask and accessories as appropriate helps ensure you are receiving the best, most comfortable therapy possible.

ResMed Quattro™ Air for Her Headgear Intended Use The Quattro Air is a noninvasive accessory used for channeling airflow(with or without supplemental oxygen) to a patient from a positive airway pressure (PAP) device such as a continuous positive airway pressure (CPAP) or bilevel system.Using your mask When using your mask with ResMed CPAP or bilevel devices that have mask setting options, refer to the Technical specifications section in this user guide for mask selection options. For a full list of compatible devices for this mask, see the Mask/Device Compatibility List on www.resmed.com on the Products page under Service and Support. If you do not have internet access. ResMed Quattro™ Air User Guide: Explanation: CPAP and bilevel devices are intended to be used with special masks (or connectors) which have vent holes to allow continuous flow of air out of the mask. When the device is turned on and functioning properly, new air from the device flushes the exhaled air out through the mask holes. When the device is turned off, the mask valve opens to atmosphere allowing fresh air to be breathed. However, a higher level of exhaled air may be rebreathed when the device is off. This applies to most full face masks for use with CPAP and bilevel devices. The Quattro Air is to be used by patients (weighing 66 lb (30 kg)) for whom positive airway pressure therapy has been prescribed
intended for single-patient reuse in the home environment and multipatient reuse in the hospital/institutional environment
The mask must be used under qualified supervision for users who are unable to remove the mask by themselves. The mask may not be suitable for those predisposed to aspiration
The elbow and valve assembly have specific safety functions. The mask should not be worn if the valve is damaged as it will not be able to perform its safety function. The elbow should be replaced if the valve is damaged, distorted or torn
The vent holes must be kept clear. The mask should only be used with CPAP or bilevel devices recommended by a physician or respiratory therapist
The mask should not be used unless the device is turned on. Once the mask is fitted, ensure the device is blowing air. 
Follow all precautions when using supplemental oxygen
Oxygen flow must be turned off when the CPAP or bilevel device is not operating, so that unused oxygen does not accumulate within the device enclosure and create a risk of fire
Oxygen supports combustion. Oxygen must not be used while smoking or in the presence of an open flame. Only use oxygen in well ventilated rooms
At a fixed rate of supplemental oxygen flow, the inhaled oxygen concentration varies, depending on the pressure settings, patient breathing pattern, mask, point of application and leak rate. This warning applies to most types of CPAP or bilevel devices
Using the mask incorrectly or with incompatible devices can affect its seal, comfort, and the effectiveness of therapy. It may also cause leaks and impact the functioning of your CPAP or bilevel device
Discontinue using this mask if you have ANY adverse reaction to the use of the mask, and consult your physician or sleep therapist
Using a mask may cause tooth, gum or jaw soreness or aggravate an existing dental condition. If symptoms occur, consult your physician or dentist
As with all masks, some rebreathing may occur at low CPAP pressures. Refer to your CPAP or bilevel device manual for details on settings and operational information