ResMed Air10 DC/DC Converter
0.0
(0)
How to get it
Details
ResMed Air10 DC/DC Converter
1.00 EACH, 2.54 lbs. Item # 303038
The ResMed Air10 DC/DC Converter allows you to use your AirSense 10 or AirCurve 10 CPAP machine in a variety of locations, including in your car, boat, or RV. The converter plugs into a 12V or 24V DC power source, and it provides up to 90W of power to your CPAP machine. The converter is lightweight and easy to use, and it is backed by a one-year warranty. HSA/FSA eligible
Can be used while traveling with a 12V or 24V DC power source such as a car or boat
Can also power ResMed HumidAir heated humidifier and ClimateLineAir™ heated tubing
Gives the freedom to travel while still maintaining therapy
Compatible with ResMed AirSense™ 10 or AirCurve™ 10 therapy machines
Can be used while traveling with a 12V or 24V DC power source such as a car or boat
Can also power ResMed HumidAir heated humidifier and ClimateLineAir™ heated tubing
Gives the freedom to travel while still maintaining therapy
Compatible with ResMed AirSense™ 10 or AirCurve™ 10 therapy machines
| Concern | Lung health |
|---|---|
| Features | Heated |
| Material | Plastic |
| Product type | Cable adapters |
| Quantity | Single pack |
Ingredients
See the full list of product ingredients on the product label. Please see the full list of product ingredients on the product label.
Directions
See directions below. Make sure the converter is turned off
Plug the converter into a 12V or 24V DC power source
Plug the converter connector into the device power inlet/DC input socket
Switch on the converter
The light (E) will glow green when it powers on
The light will flash continuously if the connection is not made, or if the device is in standby or power save mode when the connection is made
If the battery is low, the light will glow amber
If the light does not operate, check that the converter switch (A) is on
Plug the converter into a 12V or 24V DC power source
Plug the converter connector into the device power inlet/DC input socket
Switch on the converter
The light (E) will glow green when it powers on
The light will flash continuously if the connection is not made, or if the device is in standby or power save mode when the connection is made
If the battery is low, the light will glow amber
If the light does not operate, check that the converter switch (A) is on
Warnings
ResMed Air10™ DC/DC converter While we recommend using DC-to-DC converters, if you must use a DC-to-AC inverter, you can do so with some ResMed devices. The following questions step you through identification of the appropriate battery for use with a DC-to-AC inverter to power your ResMed device. We recommend using a pure sine wave inverter with a continuous power rating of 300 watts and a peak/surge rating of 500 watts. WARNING: We recommend only using an inverter certified by an accredited testing and certification organization, such as VDE, TSU or BSI in addition to CE markings for EU countries or UL markings for the USA. See product related warnings and power conversion tables in our battery guide. Match the voltage of your battery with the voltage requirement of your converter or inverter
Always check with the battery manufacturer for discharge rates and charging instructions. Damage to the battery may result from excessive discharge or incorrect charging
Always follow the battery manufacturer's instructions for maintenance and storage of the battery
Always check with the battery manufacturer for discharge rates and charging instructions. Damage to the battery may result from excessive discharge or incorrect charging
Always follow the battery manufacturer's instructions for maintenance and storage of the battery
From ResMed
Additional resources
*Customer reviews and ratings solely reflect the views and opinions of the individual contributors and are not created or endorsed by CVS Pharmacy. Please review the product labeling and consult with your doctor with any health or medical questions.
ResMed Air10 DC/DC Converter
0.0
(0)