Ossur Cold Rush Cold Therapy Device Hip Pad

Includes the Ossur Cold Rush Cold Therapy Device, a left hip pad and elastic straps. Instructions included

See directions below.  Do NOT plug unit into wall socket until steps 27 are completed.
 Fill reservoir with water to the indicated fill line. Warning: water level should not exceed the reference mark on the sticker inside the bucket to avoid risk of overflow when closing the cover.
 Add chopped or cubed ice to the reservoir up to the indicated fill line. Warning: Make sure the ice level does not exceed the reference mark on the sticker. Failure to comply will cause device overflow when closing the lid.
 Close the reservoir. With handle in the open position, press lid firmly onto unit making certain that the lid is in full contact with the vessel and the seal is engaged, then pull handle into the locked position.
 Attach the provided 12V power supply to DC power port, but do not plug into wall.
 Apply insulation barrier (not included) over the patients skin in the area to be treated.
Connect Cold Rush pad to hose extending from the device. To ensure proper connection, push couplings together until they snap into place.
 Apply Cold Rush Pad over insulation barrier. The Cold Rush Pad should never be applied directly over the patients skin.
 Plug the provided 12V power supply to wall socket.
To turn off the cold therapy device, unplug the power supply unit from wall socket.
 Always turn the cold therapy device off before disconnecting the Cold Rush Pad or any hoses. To disconnect the hoses, press the release tabs on the coupling and pull the connectors apart.
 To open lid, press handle down to disengage lid seal, then lift to remove.
 Drain all of the water out of the cold therapy device after each use.
 Follow directions 28 before each use.

Before you use any product for health care, we advise that you consult your physician or primary healthcare provider and seek the appropriate advice and supervision prior to use.