EZ-Access EZ-BATHE Body Washing Basin 84 in. x 31 in. x 13.5 in., Green

See directions below.

See directions below. We suggest that you practice Inflating/Deflating The Basin and pillow and setting up the attachments before attempting the actual bathing
How to inflate & deflate: The wet/dry vacuum Inflates The Basin and pillow using The Exhaust port with the end of the hose
The vacuum hose does not go inside the Inflating/ Deflating Valve. Simply hold the end of the hose over Valve while Inflating/Deflating your EZ-BA The (see illustration). Hose should be held snug against Basin while squeezing The Valve to allow airflow
Fill with air until Basin is firm but do not over-inflate
Deflate the Basin and pillow in the same manner as inflating using the opposite Suction port

Be sure that drain hose is connected before attempting to fill EZ-BATHE with water. EZ-BATHE is best used as a lay-down shower. If you choose to use the product as a soaking tub, please be aware of the inherent risks. Like any inflatable product, there is risk of unexpected deflation and water spillage may occur. Homecare Products, Inc. cannot be responsible for any property damage as a result. Do not leave patient unattended while using the EZ-BATHE. For the benefit of patient comfort, it is helpful to have a clean linen or large towel available to place on him/her to keep warm while the unit drains excess water. The (F) INFLATABLE PILLOW, when inflated to its maximum capacity, may be too high to support the patients head and shoulders comfortably. Deflate as needed using the valve on pillow. As the patient will be thoroughly cleansed and dried after using the EZ-BATHE, it is suggested that fresh linen be placed on the bed before the bath is started. The EZ-BATHE should be at room tem