Drive Medical Multi-Purpose Tilt-Top Split Overbed Table

1.0
(1)


How to get it




Details

Drive Medical Multi-Purpose Tilt-Top Split Overbed Table
1.00 EACH, 22 lbs. Item # 641308
The Multi-Purpose Tilt-Top Split Overbed Table from Drive Medical gives you two stable, independent surfaces for eating, working, or entertainment. The height of the attractive wood-grain tabletops is infinitely adjustable and the larger surface can be angled to place it at the ideal position for you. The smaller surface always remains flat, perfect for keeping food, drink, glasses, remote controls, or other items secure. This Multi-Purpose Tilt-Top Split Overbed Table can also be used as a mobile workstation, a drafting table, a laptop desk, an artist's table, or an entertainment tray. With a 55 pound weight capacity, you can be assured your items will be safe and secure on this table. The tabletop can be raised as high as 46 inches allowing it to be used as a standing desk. Additionally, the Overbed Table's caster wheels make it easy to maneuver and allow the table to be placed wherever it is most convenient. Features and Benefits: Your Drive brand product is warranted to be free of defects in materials and workmanship for the lifetime of the original consumer purchaser. This device was built to exacting standards and carefully inspected prior to shipment. This Lifetime Limited Warranty is an expression of our confidence in the materials and workmanship of our products and our assurance to the consumer of years of dependable service. This warranty does not cover device failure due to owner misuse or negligence, or normal wear and tear. The warranty does not extend to non-durable components, such as rubber accessories, casters, and grips, which are subject to normal wear and need periodic replacement. If you have a question about your Drive device or this warranty, please contact an authorized Drive dealer. Features two table surfaces
Convenient and sturdy for ultimate functionality
Carries a recommended weight of up to 300 pounds

Ingredients

See the full list of product ingredients on the product label.

Directions

Assembly instructions: Remove contents from packaging and lay top boards upside down on flat surface with Mounting Tubes facing upward. 2. Take the Column Assembly and place Trip Lever on top of Trip Rod and secure with Bolt and Nut 3. Remove Triangle Knob and Spacer and remove Inner tube from Outer tube. 4. Insert outer tube on column assembly through mounting tube on short top. Then insert outer tube through mounting tube on large top. Then insert inner tube through Mounting tube. Tighten thumb screw into hole on Outer tube. 5. Replace Triangle Knob and Spacer and secure by tightening the knob. 6. Install two Casters With Lock into Base which connects to Column Assembly. Install two Non-Locking Casters into base opposite Column Assembly. 7. Install two Bolt Sleeves into upside down Base and then position two Bolts through Bolt Plate and into Bolt Sleeves. Position Base over Column Assembly and thread bolts into bottom of Column Assembly and tighten using 16mm wrench. 8. Turn the table upright and stand on casters. Operating instructions: To raise top to desired height, apply light pressure upward at any point under table. 2. To lower, squeeze trip lever (3) up towards top and push down at column to desired height. Do not put pressure on tabletop end that is opposite the column. Column assembly will lock upon release of trip lever. 3. To tilt, turn Triangle Knob counter-clockwise to loosen. Set to desired angle and then turn knob clockwise to tighten. Short table top does not tilt.

Warnings

For safety - Do not remove black screw on column assembly until the table is fully assembled and standing in an upright position. After removing black screw, replace with chrome screw included in hardware package. The bottom chrome screw with the "do not remove" label should Never be removed as it will damage the unit and void your warranty.
*Customer reviews and ratings solely reflect the views and opinions of the individual contributors and are not created or endorsed by CVS Pharmacy. Please review the product labeling and consult with your doctor with any health or medical questions.

Drive Medical Multi-Purpose Tilt-Top Split Overbed Table

1.0
(1)